background image

Step 2

Select 

Save

.

----End

13.5 Setting the Sleep and Wakeup Modes

Your TE30 supports the sleep and wakeup modes. You can set the sleep, automatic startup, and
automatic shutdown times.

To reduce power consumption, you can configure your TE30 to enter sleep mode after it has
been idle for a predefined period of time.

Procedure

Step 1

Choose 

Advanced Settings

 > 

Settings

 > 

General

 > 

Power supply

. Set the sleep and automatic

startup and shutdown parameters by referring to 

Table 13-4

.

Table 13-4

 Sleep and automatic startup and shutdown parameters

Parameter

Description

Setting

Shut Down

Specifies whether the TE30
can be powered off.
If you set this parameter to

Disable

, you can only restart

the TE30 or place it in sleep

mode after you press 

 on

the remote contol.

The default value is 

Enable

.

Enter sleep mode

Specifies the period after
which the TE30 enters sleep
mode if you do not perform
any operations.
If you set this parameter to

Never

, the TE30 will never

enter sleep mode.

The default value is 

Never

.

Wake-on-LAN

Specifies whether you can
use an encapsulation tool to
remotely power on or wake
the TE30.

The default value is 

Disable

.

Scheduled power-on

Specifies whether the TE30
automatically powers on at
predefined time.
If you enable this function,
you must also set 

Scheduled

power-on time

.

The default value is 

Disable

.

HUAWEI TE30 Videoconferencing Endpoint
User Guide

13 Maintenance

Issue 01 (2013-03-27)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

125

Summary of Contents for TE30






























































































































































Reviews: