Huawei SUN2000 Series User Manual Download

Page: 9 / 170

SUN2000-(3.8KTL-11.4KTL)-USL0
User Manual

1 Safety Precautions

Issue 01 (2018-05-21)

Huawei Proprietary and Confidential

Personnel Requirements

Only certified electricians are allowed to install, connect cables for, commission, maintain,
troubleshoot, and replace the SUN2000.



Operation personnel should receive professional training.



Operation personnel should read through this document and follow all the precautions.



Operation personnel should be familiar with the safety standards relevant to electrical
systems.



Operation personnel should understand the composition and working principles of the
grid-tied PV system and be aware of local regulations.



Operation personnel must wear proper personal protective equipment (PPE).

Protecting Labels



Do not scrawl or damage any labels on the SUN2000 enclosure. These labels contain
important information about safe operation.



Do not scrawl or damage the nameplate on the SUN2000 enclosure. This nameplate
contains important product information.

Installation

Never power on the SUN2000 during installation.



Ensure that the SUN2000 is not connected to a power supply or powered on before
finishing installation.



To allow proper heat dissipation and installation, maintain appropriate clearances
between the SUN2000 and other objects, as shown in

Figure 1-1

. If you have any

questions about the clearances, consult local technical support engineers.

Summary of Contents for SUN2000 Series











































































































































































Search results

Summary of Contents for SUN2000 Series

Reviews:

Related manuals for SUN2000 Series

Brands by name

Popular brands

Huawei SUN2000 Series, User Manual

Search results

Summary of Contents for SUN2000 Series

Reviews:

Related manuals for SUN2000 Series

Brands by name

Popular brands