Huawei SUN2000 Series User Manual Download

Page: 140 / 170

SUN2000-(3.8KTL-11.4KTL)-USL0
User Manual

7 Operations on the Local FusionHome App

Issue 01 (2018-05-21)

Huawei Proprietary and Confidential

133

Symptom

Possible Cause

Measure

All data fails to be obtained
during operations.

Connection to the SUN2000
has been interrupted.

Reconnect to the SUN2000.

The SUN2000 cannot be
obtained.

An error has occurred in the
WiFi connection to the app.



If the list still cannot be
obtained after several
attempts, log out. Then
log in and try again.



Check whether the WiFi
connection is correct.

No upgrade package is
available for an upgrade.

No upgrade package is
saved to the mobile phone.

Save the upgrade package to
the mobile phone.

Summary of Contents for SUN2000 Series











































































































































































Search results

Summary of Contents for SUN2000 Series

Reviews:

Related manuals for SUN2000 Series

Brands by name

Popular brands

Huawei SUN2000 Series, User Manual

Search results

Summary of Contents for SUN2000 Series

Reviews:

Related manuals for SUN2000 Series

Brands by name

Popular brands