Huawei SUN2000 Series User Manual Download

Page: 159 / 170

SUN2000-(3.8KTL-11.4KTL)-USL0
User Manual

9 Handling the SUN2000

Issue 01 (2018-05-21)

Huawei Proprietary and Confidential

152

Handling the SUN2000

9.1 Removing the SUN2000

Procedure

Step 1

Power off the system by following the instructions in

6.3 Powering Off the System

Step 2

Disconnect all cables from the SUN2000, including signal cables, DC input power cables,
battery cables, AC output power cables, and PE cables.

Step 3

Remove the WiFi antenna from the SUN2000.

Step 4

Remove the SUN2000 from the mounting bracket.

Step 5

Remove the mounting bracket.

----End

9.2 Packing the SUN2000



If the original packaging is available, put the SUN2000 inside it and then seal it using
adhesive tape.



If the original packaging is not available, put the SUN2000 inside a suitable cardboard
box and seal it properly.

9.3 Disposing of the SUN2000

If the SUN2000 service life expires, dispose of it according to the local disposal rules for
electrical equipment and electronic component waste.

Summary of Contents for SUN2000 Series











































































































































































Search results

Summary of Contents for SUN2000 Series

Reviews:

Related manuals for SUN2000 Series

Brands by name

Popular brands

Huawei SUN2000 Series, User Manual

Search results

Summary of Contents for SUN2000 Series

Reviews:

Related manuals for SUN2000 Series

Brands by name

Popular brands