Huawei SUN2000-2KTL-L1 User Manual Download Page 91

Page: 91 / 122

Alarm

Alarm Name

Alarm

Severity

Possible Causes

Troubleshooting

2034

Grid

Overvoltage

Major

Cause ID = 1
The grid voltage exceeds

the higher threshold or the

high voltage has lasted for

more than the value

specified by high voltage

ride-through (HVRT).

1. If the alarm occurs

occasionally, the power

grid may be abnormal

temporarily. The

SUN2000 automatically

recovers after detecting

that the power grid

becomes normal.

2. If the alarm occurs

frequently, check

whether the power grid

voltage is within the

allowed range. If no,

contact the local power

operator. If yes, modify

the grid overvoltage

protection threshold

through the mobile app,

SmartLogger, or NMS

with the consent of the

local power operator.

3. Check whether the peak

voltage of the power

grid is too high. If the

fault persists and cannot

be rectified for a long

time, contact the power

operator.

SUN2000-(2KTL-6KTL)-L1

User Manual

8 System Maintenance

Issue 04 (2021-04-01)

Summary of Contents for SUN2000-2KTL-L1



























































































































Search results

Summary of Contents for SUN2000-2KTL-L1

Reviews:

Huawei SUN2000-2KTL-L1, User Manual, Page: 91 / 122

Search results

Summary of Contents for SUN2000-2KTL-L1

Reviews: