Huawei SUN2000-2KTL-L1 User Manual Download

Page: 24 / 122

System Installation

4.1 Checking Before the Installation

Checking Outer Packing

Before unpacking the SUN2000, check the outer packing for damage, such as

holes and cracks, and check the SUN2000 model. If any damage is found or the

SUN2000 model is not what you requested, do not unpack the package and

contact your dealer as soon as possible.

NO TICE

You are advised to remove the packing materials within 24 hours before installing

the SUN2000.

Checking Deliverables

After unpacking the SUN2000, check that the deliverables are intact and complete.

If any item is missing or damaged, contact your dealer.

NO TE

For details about the number of accessories delivered with the SUN2000, see the

Packing

List

in the packing case.

SUN2000-(2KTL-6KTL)-L1

User Manual

4 System Installation

Issue 04 (2021-04-01)

Summary of Contents for SUN2000-2KTL-L1



























































































































Search results

Summary of Contents for SUN2000-2KTL-L1

Reviews:

Related manuals for SUN2000-2KTL-L1

Brands by name

Popular brands

Huawei SUN2000-2KTL-L1, User Manual

Search results

Summary of Contents for SUN2000-2KTL-L1

Reviews:

Related manuals for SUN2000-2KTL-L1

Brands by name

Popular brands