manualshive.com logo in svg

Huawei SUN2000-2KTL-L1, User Manual, Page: 117 / 122

Share
Download
Huawei SUN2000-2KTL-L1 User Manual Download Page 117

D

 Rapid Shutdown

When all PV modules connected to the solar inverter are configured with

optimizers, the PV system shuts down quickly and reduces the output voltage of

the PV string to below 30 V within 30 seconds. If optimizers are configured for

some PV modules, the rapid shutdown function is not supported.
Perform the following step to trigger rapid shutdown:
●

Method 1: Turn off the AC switch between the solar inverter and the power

grid.

（

If the SUN2000 supports and enables the off-grid function, the rapid

shutdown function is not supported.

）

●

Method 2: Turn off the DC switch at the bottom of the SUN2000. (If an extra

DC switch is connected to the input side of the SUN2000, turning off this DC

switch will not trigger rapid shutdown.)

SUN2000-(2KTL-6KTL)-L1

User Manual

D Rapid Shutdown

Issue 04 (2021-04-01)

Copyright © Huawei Technologies Co., Ltd.

111

Summary of Contents for SUN2000-2KTL-L1



























































































































Reviews:

No comments