Procedure
Step 1
Run:
system-view
The system view is displayed.
Step 2
Run:
ripng
[
process-id
]
The RIPng view is displayed.
Step 3
Run:
default-cost
cost
The default cost is set for the external routes imported by RIPng.
If no metric is specified, this command can be used to set the default cost for the external routes
imported by RIPng from other routing protocols.
----End
3.5.5 Configuring RIPng to Import External Routes
Similar to RIP, RIPng can import external routes to enrich routing information.
Context
Do as follows on the RIPng switch:
Procedure
Step 1
Run:
system-view
The system view is displayed.
Step 2
Run:
ripng
[
process-id
]
The RIPng view is displayed.
Step 3
(Optional) Run:
default-cost
cost
The default cost is set for imported external routes.
Step 4
Run:
import-route
{ {
ripng
|
isis
|
ospfv3
}
process-id
|
bgp
[
permit-ibgp
] |
unr
|
direct
|
static
} [
cost
cost
|
route-policy
route-policy-name
]
*
External routes are imported.
NOTE
Import of IBGP routes in RIPng process can lead to routing loops. Administrator should take care of routing
loops before configuring
permit-ibgp
.
Step 5
(Optional) Run:
S6700 Series Ethernet Switches
Configuration Guide - IP Routing
3 RIPng Configuration
Issue 01 (2012-03-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
69
