manualshive.com logo in svg

Huawei S6700 Series, Configuration Manual

Share
Download
Huawei S6700 Series Configuration Manual Download Page 26

Step 2

Run:

ipv6 route-static

 

dest-ipv6-address

 

prefix-length

 { 

interface-type

 

interface-

number

 

nexthop-ipv6-address

| 

nexthop-ipv6-address

 } [ 

preference

 

preference

 | 

tag

 

tag

 ] 

*

 [ 

description

 

text

 ]

An IPv6 static route is configured.

When configuring a static route, you need to specify either the outbound interface or the next-
hop address according to the actual situation. If the outbound interface is a non-P2P interface,
you must also specify the next-hop address in addition to specifying the outbound interface.

If 

preference

 is not specified, the default preference is 60.

By default, no IPv6 static route is configured.

----End

1.4.3 (Optional) Setting the Default Preference for IPv6 Static
Routes

By setting the default preference for an IPv6 static route, you can change the preference of the
static route.

Context

Do as follows on the switch that need to be configured with IPv6 static routes and change the
default priority for IPv6 static routes:

Procedure

Step 1

Run:

system-view

The system view is displayed.

Step 2

Run:

ipv6 route-static default-preference

 

preference

The default preference of IPv6 static routes is set.

By default, the preference of IPv6 static routes is 60.

When an IPv6 static route is configured, the default preference is used if the preference of the
static route is not explicitly specified. After the default preference is specified, the default
preference is valid for subsequent rather than existing IPv6 static routes.

----End

1.4.4 Checking the Configuration

After an IPv6 static route is configured, you can check detailed information about the configured
route.

Prerequisites

The configurations of an IPv6 static route are complete.

S6700 Series Ethernet Switches
Configuration Guide - IP Routing

1 IP Static Route Configuration

Issue 01 (2012-03-15)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

7

Summary of Contents for S6700 Series

























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands