manualshive.com logo in svg

Huawei S6700 Series, Configuration Manual

Share
Download
Huawei S6700 Series Configuration Manual Download Page 635

After the command is used, policy filtering is immediately effective. You can run the command
to configure BGP to immediately apply new policies.

The polices affected by the timer are ACLs, IP prefix lists, AS-Path filters, community filters,
extended community filters, RD filters, and Route-Policies.

----End

10.8.3 Checking the Configuration

After the delay for applying a routing policy is configured, you can check the configuration.

Prerequisites

The configurations for controlling the valid time of the routing policy are complete.

Procedure

l

Run the 

display current-configuration

 

|

 

include

 

notify-delay

 command to check the

delay for applying the routing policy.

----End

10.9 Maintaining the Routing Policy

Maintaining routing policies involves clearing the statistics of the IP prefix list and debugging
routing policies.

Context

CAUTION

The statistics of IP prefix lists cannot be restored after being cleared. Exercise caution when
running this command.

By default, the statistics of IP prefix lists are not cleared.

Procedure

l

Run 

reset ip ip-prefix

 [ 

ip-prefix-name

 ] command in the user view to clear the IPv4 prefix

list statistics.

l

Run 

reset ip ipv6-prefix

 [ 

ipv6-prefix-name

 ] command in the user view to clear the IPv6

prefix list statistics.

----End

10.10 Configuration Examples

This section provides several configuration examples of the routing policy.

S6700 Series Ethernet Switches
Configuration Guide - IP Routing

10 Routing Policy Configuration

Issue 01 (2012-03-15)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

616

Summary of Contents for S6700 Series

























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands