manualshive.com logo in svg

Huawei S6700 Series, Configuration Manual

Share
Download
Huawei S6700 Series Configuration Manual Download Page 64

2.8.3 Setting the Interval for Sending Packets and the Maximum
Number of the Sent Packets

By setting the interval for sending RIP Update packets and the maximum number of Update
packets to be sent each time, you can effectively control the memory used by a Switch to process
RIP Update packets.

Context

Do as follows on the RIP switch:

Procedure

Step 1

Run:

system-view

The system view is displayed.

Step 2

Run:

interface

 

interface-type

 

interface-number

The interface view is displayed.

The interface must be a VLANIF interface.

Step 3

Run:

rip pkt-transmit

 { 

interval

 

interval

 | 

number

 

pkt-count

 } 

*

The interval for sending Update packets and the maximum number of packets sent each time
are set on the interface.

----End

2.8.4 Configuring Split Horizon and Poison Reverse

You can configure split horizon and poison reverse to prevent routing loops.

Context

If both split horizon and poison reverse are configured, only poison reverse takes effect.

Do as follows on the RIP switch:

Procedure

Step 1

Run:

system-view

The system view is displayed.

Step 2

Run:

interface

 

interface-type

 

interface-number

The interface view is displayed.

The interface must be a VLANIF interface.

S6700 Series Ethernet Switches
Configuration Guide - IP Routing

2 RIP Configuration

Issue 01 (2012-03-15)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

45

Summary of Contents for S6700 Series

























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands