manualshive.com logo in svg

Huawei RRU3262, Installation Manual, Page: 67 / 130

Share
Download
Huawei RRU3262 Installation Manual Download Page 67

 

Step 5

Install the sheet metal tab for fixing the neighboring RRUs, as shown in 

Figure 8-14

.

Figure 8-14

 Installing the sheet metal tab

(1) Screw

(2) Sheet metal tab

 
1.

Use an M6 Phillips screwdriver to loosen the screw on the sheet metal tab farther from the
handle of the second RRU and remove the screw.

2.

Use an M6 Phillips screwdriver to loosen the screw on the sheet metal tab closer to the
handle of the second RRU. Then, rotate the sheet metal tab to align the vacant hole in the
sheet metal tab with a hole on the top of the first RRU.

3.

Insert the removed screw into the hole on the top of the first RRU and use an M6 torque
screwdriver to tighten the screw to 5 N·m (44.25 lbf·in.).

----End

8.2.3 Installing Three or More RRUs

This section describes the procedure and precautions for installing three or more RRUs on a
pole.

Prerequisites

The hoist clamp on the main bracket is secured properly.

RRU3262
Installation Guide

8 Installing the RRU

Issue 01 (2014-11-20)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

59

Summary of Contents for RRU3262



































































































































Reviews:

No comments