manualshive.com logo in svg

Huawei RRU3262, Installation Manual, Page: 60 / 130

Share
Download
Huawei RRU3262 Installation Manual Download Page 60

(6) Hoist clamp on
the main bracket

(7) Main bracket

(8) Inner hexagon
screw

(9) Pole installation
bracket

(10) Auxiliary
bracket

 

8.2 Installing the RRU on a Pole

One or more RRUs can be installed on a pole.

8.2.1 Installing a Single RRU

This section describes the procedure and precautions for installing a single RRU on a pole.

Prerequisites

Before you install an RRU on a pole secured on a tower, the RRU and its mounting brackets are
hoisted onto the tower. For details, see 

7.1 Hoisting an RRU onto a Tower

.

The hoist clamp on the main bracket is secured properly.

NOTICE

l

Do not stand an RRU upright because the RF ports cannot support the weight of the RRU.

l

Place a foam pad or cardboard under an RRU to protect the RRU housing from damage
during the installation.

Procedure

Step 1

Determine a position for installing the mounting brackets.

l

If the RRU is installed on a tower, determine a position for installing the mounting brackets
according to the instructions in 

3.5.1 Clearance for a Single RRU

.

l

If the RRU is installed on the ground, determine a position for installing the mounting
brackets according to 

Figure 8-3

.

RRU3262
Installation Guide

8 Installing the RRU

Issue 01 (2014-11-20)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

52

Summary of Contents for RRU3262



































































































































Reviews:

No comments