manualshive.com logo in svg

Huawei RRU3262, Installation Manual, Page: 3 / 130

Share
Download
Huawei RRU3262 Installation Manual Download Page 3

About This Document

Purpose

This document describes the process of installing a DC blade RRU3262 (referred to as RRU in
this document).

Product Versions

The following table lists the product versions related to this document.

Product Name

Solution Version

Product Version

DBS3900

l

SRAN8.0 and later
versions

l

eRAN6.0 and later
versions

V100R008C00 and later
versions

 

Intended Audience

This document is intended for:

Base station installation engineers

Organization

1 Changes in RRU3262 Installation Guide

This section describes the changes in the RRU3262 Installation Guide.

2 Installation Preparations

This chapter describes the reference documents, tools, and instruments that must be ready before
the installation. In addition, it specifies the skills and prerequisites that installation engineers
must have.

3 Information About the Installation

Before installing an RRU, you must be familiar with its exterior, ports, indicators, installation
options and installation clearance requirements.

RRU3262
Installation Guide

About This Document

Issue 01 (2014-11-20)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

ii

Summary of Contents for RRU3262



































































































































Reviews:

No comments