Huawei RRU3262 Installation Manual Download Page 11

Page: 11 / 130

Installation Preparations

About This Chapter

This chapter describes the reference documents, tools, and instruments that must be ready before
the installation. In addition, it specifies the skills and prerequisites that installation engineers
must have.

2.1 Reference Documents

Before the installation, you must be familiar with reference documents.

2.2 Tools and Instruments

You must prepare the following tools and instruments before the installation.

2.3 Skills and Requirements for Onsite Personnel

Onsite personnel must be qualified and trained. Before performing any operation, onsite
personnel must be familiar with correct operation methods and safety precautions.

RRU3262
Installation Guide

2 Installation Preparations

Issue 01 (2014-11-20)

Huawei Proprietary and Confidential

Summary of Contents for RRU3262



































































































































Search results

Summary of Contents for RRU3262

Reviews:

Huawei RRU3262, Installation Manual, Page: 11 / 130

Search results

Summary of Contents for RRU3262

Reviews: