Operation Manual - System Management
Quidway S3000-EI Series Ethernet Switches
Chapter 4 System Maintenance and Debugging
Huawei Technologies Proprietary
4-2
4.1.4 Set the Summer Time
You can set the name, starting and ending time of the summer time.
Perform the following operations in the user view.
Table 4-4
Setting the summer time
Operation
Command
Set the name and range of the summer
time
clock summer-time
zone_name
{
one-off
|
repeating
}
start-time
start-date end-time end-date offset-time
Remove the setting of the summer time
undo clock summer-time
By default, the summer time is not set.
4.2 Display the State and Information of the System
The
display
commands can be classified as follows according to their functions.
z
Commands for displaying the system configuration information
z
Commands for displaying the system running state
z
Commands for displaying the system statistics information
For the
display
commands related to each protocols and different ports, refer to the
relevant chapters. The following
display
commands are used for displaying the system
state and the statistics information.
Perform the following operations in any view.
Table 4-5
The
display
commands of the system
Operation
Command
Display the system clock
display clock
Display the system version
display version
Display the terminal user
display users
[
all
]
Display the
saved-configuration
display saved-configuration
Display the
current-configuration
display
current-configuration
[
controller
|
interface
interface-type
[
interface-number
] |
configuration
[
configuration
] ] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
Display the state of the
debugging
display debugging
[
interface
{
interface-name
|
interface-type interface-number
}
] [
module-name
]
