Huawei NetCol5000-A050 User Manual Download Page 305

Page: 305 / 360

Procedure

Step 1 Connect a USB flash drive.

Figure 12-6 Connecting to a USB flash drive

Step 2 Check that is displayed in the status bar of the home screen, indicating that the

USB flash drive is successfully identified.

Step 3 Select an operation in USB Operations and perform the operation as prompted.

Figure 12-7 USB Operations

Step 4 Tap Remove USB to remove the USB flash drive in safe mode.

Step 5 Remove the USB flash drive and set it aside.

----End

12.3.1 How Do I Export Data?

Context

With the one-click mode, you can export active alarms, historical alarms, run logs,

and so on.

Procedure

Step 1 Choose Maint > USB Operations > Export to enter the Select Path screen.

NetCol5000-A050 In-row Air Cooled Smart Cooling

Product

User Manual

12 FAQ

Issue 08 (2021-09-17)

295

Summary of Contents for NetCol5000-A050









































































































































































































































































































































































Search results

Summary of Contents for NetCol5000-A050

Reviews:

Huawei NetCol5000-A050, User Manual, Page: 305 / 360

Search results

Summary of Contents for NetCol5000-A050

Reviews: