manualshive.com logo in svg

Huawei NE40E-X1, Hardware Description, Page: 87 / 158

Share
Download
Huawei NE40E-X1 Hardware Description Download Page 87

4.4.3 Technical Specifications

Table 4-8

 lists the technical specifications of the AUX interface cable.

Table 4-8

 Technical specifications of the AUX interface cable

Item

Description

Connector X1

Network interface connector-crystal connector-8PIN-8bit-shielded plug

Connector X2

Cable connector-D type-25PIN-female

Connector X3

Cable connector-D type-9PIN-female

Cable type

Symmetrical twisted cable-120-ohm-SEYVPV-0.5mm-24AWG-8core-
PANTONE 430U
Symmetrical twisted cable-100-ohm-SEYVP-0.48mm-26AWG-8core-
black

Number of cores 8

Fireproof class

CM

Available
length

15 m ( 49.21 ft ) for the 120-ohm cable
3 m ( 9.84 ft ) for the 100-ohm cable

 

4.5 Clock Cable

This section describes the structure and technical specifications of the clock cable.

4.5.1 Introduction

Clock cable for the 1588v2-supporting MPU

A clock cable is used to connect the clock interface on the NE40E to the clock interface on
another device. In this manner, the NE40E can receive 2-Mbit/s clock signals, 2-MHz clock
signals, 1 PPS +ASCII time signals, or two channels of DCLS time signals from the upstream
device and provides 2-Mbit/s clock signals, 2-MHz clock signals, 1 PPS +ASCII time signals,
or two channels of DCLS time signals to the downstream device.

One end of the clock cable is an RJ45 connector connected to the clock interface on the MPU
and the other end is connected to the clock interface on an external device. The connector on
the other end needs to be prepared as required on site.

An RJ45 connector is used together with the 120-ohm trunk cable.

NOTE

The wire sequence of a trunk cable used as a clock cable differs from the wire sequence of an ordinary
twisted cable.

4.5.2 Structure

HUAWEI NE40E-X1 & NE40E-X2 Universal Service
Router
Hardware Description

4 Cables

Issue 02 (2011-09-10)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

79

Summary of Contents for NE40E-X1































































































































































Reviews:

No comments