manualshive.com logo in svg

Huawei NE40E-X1, Hardware Description, Page: 65 / 158

Share
Download
Huawei NE40E-X1 Hardware Description Download Page 65

 

Panel Description

Table 3-20

 describes the indicators on the 8-Port 100Base-RJ45 Flexible Interface Card (FIC,

Supporting 1588v2).

Table 3-20

 Indicators on the 8-Port 100Base-RJ45 Flexible Interface Card (FIC, Supporting

1588v2)

Indicator

Meaning

STAT

If the indicator is steady on, it indicates that the TND1EF8T works
normally.
If the indicator is off, it indicates that the TND1EF8T is not powered on
or fails to be registered.
If the indicator is steady red, it indicates that the hardware of the
TND1EF8T is faulty.
If the indicator is steady yellow, it indicates that the FPIC is not loaded
with the logic.

 

Interface Attributes

Table 3-21

 lists the interface attributes of the 8-Port 100Base-RJ45 Flexible Interface Card (FIC,

Supporting 1588v2).

Table 3-21

 Interface attributes of the 8-Port 100Base-RJ45 Flexible Interface Card (FIC,

Supporting 1588v2)

Attribute

Value

Connector

RJ45

Working mode

Full-duplex

Standard
compliance

IEEE 802.3-2002

Frame format

Ethernet_II, Ethernet_SAP, and Ethernet_SNAP

Network protocol

IP

 

Specifications

Table 3-22

 lists the technical specifications of the 8-Port 100Base-RJ45 Flexible Interface Card

(FIC, Supporting 1588v2).

HUAWEI NE40E-X1 & NE40E-X2 Universal Service
Router
Hardware Description

3 Boards

Issue 02 (2011-09-10)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

57

Summary of Contents for NE40E-X1































































































































































Reviews:

No comments