manualshive.com logo in svg

Huawei NE40E-X1, Hardware Description, Page: 24 / 158

Share
Download
Huawei NE40E-X1 Hardware Description Download Page 24

Indicator/
Button

Description

USB indicator

If the indicator is steady green, it indicates that a mobile storage device
is identified.
If the indicator blinks green, it indicates that a mobile storage device is
being accessed or written.
If the indicator is steady red, it indicates that a mobile storage device
cannot be identified or fails to be accessed or written.
If the indicator is off, it indicates that no mobile storage device is
connected to the USB interface.

ETH LINK
indicator

If the indicator is steady green, it indicates that the ETH link is Up.
If the indicator is off, it indicates that the ETH link is Down.

ETH ACT
indicator

If the indicator blinks yellow, it indicates that data is being transmitted.
If the indicator is off, it indicates that no data is being transmitted.

RST button

The button is used for resetting the MPUG. Pressing the RST button
resets the MPUG.

 

Table 1-10

 Interfaces on the MPUG

Interface
Name

Interface Type

Description

ETH interface
(10M/100M/
1000M Base-
TX auto-
sensing)

RJ45

One ETH interface, for system maintenance

Console
interface

RJ45

One console interface, used to connect to the
console for on-site configuration

AUX interface

RJ45

One AUX interface, used to connect to the
modem for remote maintenance through a
dial-up connection

USB interface

USB 2.0

One USB interface (USB 2.0 host interface),
for software upgrade

BITS clock
interface

RJ45

Two RJ45 interfaces, used to input 1588v2
time signals

RS485 interface RJ45

Used to connect to the monitoring interface
on the external AC power supply module

 

l

Attributes of the interfaces on the MPUG

Table 1-11

 lists the USB interface attributes.

HUAWEI NE40E-X1 & NE40E-X2 Universal Service
Router
Hardware Description

1 NE40E-X1 Hardware Description

Issue 02 (2011-09-10)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

16

Summary of Contents for NE40E-X1































































































































































Reviews:

No comments