manualshive.com logo in svg

Huawei NE40E-X1, Hardware Description, Page: 5 / 158

Share
Download
Huawei NE40E-X1 Hardware Description Download Page 5

Contents

About This Document.....................................................................................................................ii

1 NE40E-X1 Hardware Description...............................................................................................1

1.1 Overview............................................................................................................................................................2

1.1.1 System Hardware Description...................................................................................................................2
1.1.2 System Architecture..................................................................................................................................2
1.1.3 Main System Features...............................................................................................................................3
1.1.4 System configuration.................................................................................................................................4
1.1.5 Main Parts of the NE40E-X1.....................................................................................................................4
1.1.6 Number of Main Parts and Slot Layout of the NE40E-X1........................................................................5

1.2 Power Supply System.........................................................................................................................................6

1.2.1 Architecture of the Power Supply System.................................................................................................6
1.2.2 Diagram of the Power Supply Architecture..............................................................................................6
1.2.3 DC Power Supply System.........................................................................................................................7

1.3 Heat Dissipation System.....................................................................................................................................9

1.3.1 System Air Channel...................................................................................................................................9
1.3.2 Fan Module................................................................................................................................................9

1.4 Data Plane.........................................................................................................................................................11

1.4.1 Introduction to the Data Plane.................................................................................................................11
1.4.2 Introduction to the NPUI-20....................................................................................................................12

1.5 Control Plane....................................................................................................................................................14

1.5.1 Introduction to the Control Plane............................................................................................................14
1.5.2 MPUG......................................................................................................................................................15

1.6 Physical Specifications.....................................................................................................................................18

1.6.1 Chassis Specifications.............................................................................................................................18
1.6.2 Board Specifications................................................................................................................................19

2 NE40E-X2 Hardware Description.............................................................................................21

2.1 Overview..........................................................................................................................................................22

2.1.1 Hardware Description..............................................................................................................................22
2.1.2 System Architecture................................................................................................................................22
2.1.3 Main System Features.............................................................................................................................23
2.1.4 System configuration...............................................................................................................................24
2.1.5 Main Parts of the NE40E-X2...................................................................................................................24

HUAWEI NE40E-X1 & NE40E-X2 Universal Service
Router
Hardware Description

Contents

Issue 02 (2011-09-10)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

iv

Summary of Contents for NE40E-X1































































































































































Reviews:

No comments