manualshive.com logo in svg

Huawei NE40E-X1, Hardware Description, Page: 27 / 158

Share
Download
Huawei NE40E-X1 Hardware Description Download Page 27

Item

Description

Heat dissipation

1136 BTU/hour

DC input
voltage

Rated
voltage

-48 V

Maximum
voltage
range

-38 V to -72 V

Ambient
temperature

Long-term

-5°C to +50°C ( 23°F to 122°F )

Short-term

-20°C to +60°C ( -4°F to 140°F )

Remarks

Temperature change rate limit: 30°C/hour ( 86°F/hour )

Storage temperature

-40°C to +70°C ( -40°F to 158°F )

Ambient
relative
humidity

Long-term

5% RH to 85% RH, noncondensing

Short-term

5% RH to 95% RH, noncondensing

Storage relative humidity

0% RH to 95% RH, noncondensing

Long-term working altitude

Lower than 3000 m ( 9842.4 ft )

Storage altitude

Lower than 5000 m (16404 ft )

 

DANGER

The width in the dimensions does not count the size of rack-mounting ears.

The measurement point of the temperature and humidity is 1.5 m ( 4.92 ft ) over the cement floor
or ESD-preventive floor and 0.4 m ( 1.31 ft ) in front of the cabinet with no front door or back
door.

Short-term operation means that the continuous working time does not exceed 96 hours and that
the accumulated working time per year does not exceed 15 days. Otherwise, it is referred to as
long-term operation.

The device can not be start at low temperature.

1.6.2 Board Specifications

Type

Board Name

Silkscreen Print

MPU

CR5D00MPUG7
0

MPUG

2-port 10GE LAN/WAN-XFP NPU

CR5DNPUI2070

NPUI-20

8-port 100/1000Base-X-SFP HIC

CR5D00E8GF70

8xFE/GE

HUAWEI NE40E-X1 & NE40E-X2 Universal Service
Router
Hardware Description

1 NE40E-X1 Hardware Description

Issue 02 (2011-09-10)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

19

Summary of Contents for NE40E-X1































































































































































Reviews:

No comments