Huawei IN200, User Manual

Page: 120 / 142

Parameters
Parameter Description Value
devicename Indicates the name of the
IN200 to be queried and set in
the system. For example, the value can
be
enp6s0 or enp7s0 .
mode Enables or disables the PFC
function. l 1 : Enables PFC.
l 0 : Disables PFC.
priority Enables or disables PFC
pointer for the 0
– 7 priority.
xxxxxxxx
l 1 : enables the pointer.
l 0 : disables the pointer.
Usage Instruction
After PFC is enabled for the first time after you run the -e command, you can run the -p
command to set the PFC pointer priority.
Example
# Check whether PFC is enabled for enp6s0.
[root@localhost ~]# hinicadm pfc -i enp6s0
enp6s0 pfc state: disable
pfcup: 1 1 1 1 1 1 1 1
num TC's: 4
# Enable PFC for enp6s0.
[root@localhost ~]# hinicadm pfc -i enp6s0 -e 1
Set enp6s0 pfc to enable succeed
# Enable the PFC for priority 2 and priority 3 of enp6s0.
[root@localhost ~]# hinicadm pfc -i enp6s0 -p 00110000
Set enp6s0 pfc to enable succeed.
Set enp6s0 pfc succeed
6.1.4.47 Setting the ETS Function (ets)
6.1.4.47.1 Querying and Setting the ETS Function (-e)
Function
The ets -e command is used to query or set the ETS function of a device.
Format
hinicadm ets -i < devicename > -e < mode >
Huawei IN200 NIC
User Guide
6 Management Tools
Issue 06 (2019-07-27) Copyright © Huawei Technologies Co., Ltd. 111