Huawei IN200, User Manual

Page: 127 / 142

Command Function
ip link set dev ethx vf <num> <rate
txrate> Sets the rate limit parameter of the virtual
network port.
ip link set dev ethx vf <num> state
<staus> Sets the link status of the virtual network port.
Table 6-5 lists the common vconfig commands supported by the IN200 and their functions.
For details about how to use the commands, see the help information provided on the CLI.
Table 6-5 Common vconfig commands
Command Function
vconfig add ethx <vlan_id> Adds a VLAN sub-device.
vconfig rem <vlan-name> Deletes a VLAN sub-device.
Table 6-6 lists the common dcbtool commands supported by the IN200 and their functions.
For details about how to use the commands, see the help information provided on the CLI.
Table 6-6 Common dcbtool commands
Command Function
dcbtool sc ethx dcb on/off Enables or disables Data Center Bridgin
(DCB).
dcbtool gc ethx dcb Queries the DCB status.
dcbtool gc ethx pg Queries the priority group settings.
dcbtool sc ethx pg pgid:xxx Specifies the priority bandwidth group to
which a specified priority is mapped.
dcbtool sc ethx pg pgpct:x,x,x,x,x,x,x,x Specifies the bandwidth ratio of each
priority bandwidth group (the sum is 100%).
dcbtool sc ethx pg strict:xxxxxxxx Sets a specified priority to strict .
dcbtool sc ethx pg up2tc:xxxxxxxx Specifies the TC group to which each
priority is mapped.
dcbtool gc ethx pfc Queries the PFC status of each priority.
dcbtool sc ethx pfc pfcup:xxxxxxxx Specifies the PFC enablement status of each
priority.
Huawei IN200 NIC
User Guide
6 Management Tools
Issue 06 (2019-07-27) Copyright © Huawei Technologies Co., Ltd. 118