Huawei IN200 User Manual Download Page 25

Page: 25 / 142

Installing... Please wait for a moment.
Install hinic driver package successfully.

Step 4

Make the new driver take effect.

You can select either of the following methods:

Method 1
Run the

reboot

command on the OS.

Method 2:

Check that the current IN200 program has stopped.

Run the

rmmod hinic

on the OS to install the existing driver.

Run the

modprobe hinic

command on the OS to load the new driver.

----End

Upgrading the Driver on VMware ESXi

To update the driver, perform operations in

2.2.2 Installing the Driver

. The system

automatically replaces the original vib driver package based on the version and restarts for the
update to take effect.

Upgrading the Driver on Microsoft Windows

Step 1

For details, see

A.1 An Exception Occurs During Driver Installation or Uninstallation

Step 2

Go to the directory where the driver package is stored, for example, "C:\".

Step 3

Upgrade the driver package.

Double-click

hinic_<version>_<Windows_OS>_x86_64.msi

to install the driver package.

Huawei IN200 NIC
User Guide

2 Installation and Maintenance

Issue 06 (2019-07-27)

Summary of Contents for IN200















































































































































Search results

Summary of Contents for IN200

Reviews:

Related manuals for IN200

Brands by name

Popular brands

Huawei IN200, User Manual

Search results

Summary of Contents for IN200

Reviews:

Related manuals for IN200

Brands by name

Popular brands