IPE
Installation Guide
6 Installing an Infrared Do me IPC
Issue 03 (2013-02-28)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
59
Figure 6-17
Fixing the bracket on the wall
Self tapping screws
-
Positioning label
Step 7
Connect the video cable to the second video port. Check the video, adjust the lens angle, focus,
and viewing angle in the horizontal and vertical directions, and insert the SD card, as shown
in Figure 6-18.
NOTE
If the module is found loose after the video adjustment is complete, fasten the screws on the module
again and then install the inner liner and upper cover of the dome IPC.