IPE
Installation Guide
8 Installing an Infrared High Speed Do me IPC
Issue 03 (2013-02-28)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
80
Figure 8-2
Fixing the IPC onto the bracket
Fa ste n in g scre w
Step 4
Route the multi-connector cable through the bracket.
Step 5
Install the cover plate on the wall-mounted bracket and fasten the thumb screw, as shown in
Figure 8-3. (The cover plate is available in the accessory kit of the bracket.)
Figure 8-3
Installing the cover plate of the bracket
Th u mb scre w
C o ve r p la te
Step 6
Install the assembled high-speed dome IPC on the wall and fasten the four screws.
----End
Installing the IPC on the Wall When Type-2 Bracket Is Used
Step 1
Determine the positions of installation holes based on the installation dimensions of the
bracket and mark the holes. Use a percussion drill bit with a diameter of 8 mm to drill four