Huawei eSpace 7910 User Manual Download Page 3

Page: 3 / 143

Preface

Overview

This document covers the following information about eSpace 7910&7950 IP Phone:
overview, configuration, usage, and common troubleshooting methods.

Intended Audience

This document is intended for: End users.

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol Conventions

Symbol

Description

Indicates an imminently hazardous situation which, if
not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not
avoided, could result in equipment damage, data loss,
performance deterioration, or unanticipated results.
NOTICE is used to address practices not related to
personal injury.

eSpace 7910&7950 IP Phone
User Guide

Preface

Issue 03 (2017-06-30)

Huawei Proprietary and Confidential

Summary of Contents for eSpace 7910
















































































































































Search results

Summary of Contents for eSpace 7910

Reviews:

Related manuals for eSpace 7910

Brands by name

Popular brands

Huawei eSpace 7910, User Manual

Search results

Summary of Contents for eSpace 7910

Reviews:

Related manuals for eSpace 7910

Brands by name

Popular brands