Huawei eSpace 6805, Administrator'S Manual

Page: 68 / 161

eSpace 6805 IP Phone
Administrator Guide
4 Configuring and Upgrading IP Phones in Batches
Issue 01 (2014-01-06) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
66

If the version file is compressed, decompress it and obtain the .bin files. If IP phone upgrade is not
required, do not store the version file in
C:\inetpub\wwwroot if you only configure IP phones.

If the IP phones to be configured belong to different sites, store the configuration files in two
independent folders (for example,
configA and configB ) in the root directory. The folder name
cannot contain spaces; otherwise, files in the folder cannot be downloaded. Set the Option248
parameter of the DHCP server in each site to the configuration file URL, for example,
config=http://server IP/congfigA/filename.xml .
5. Set up the DHCP server environment.
For the procedure for setting up the DHCP server environment, see 6.6 Setting Up the
DHCP Server
6. Change the Option248 parameter value of the DHCP server to the version file URL and
configuration file URL.How to set the Option248 parameter, see
6.7 Setting the
Option248 Parameter
−
The URL specified by the Option248 parameter prevails. If the URL is specified in
the Option248 parameter, the upgrade and configuration URLs set on the
Maintenance > Upgrade and Provisioning page no longer take effect.
− Use a semicolon (;) to separate the version file URL and the configuration file URL.
Their sequence can be changed You can enter only a version file URL or a
configuration file URL.
Table 4-1 describes the Option248 parameter settings.
Table 4-1 Option 248 parameter settings
Setting Format Example
IP firmware=http:// server IP ;config=http:// server IP /filename.xml
IP/path firmware=http:// server IP/path ;config=http:// server
IP/path /filename.xml
IP:port firmware=http:// server IP :port;config=http:// server
IP:port /filename.xml
IP:port/path
firmware=http:// server IP:port/path ;config=http:// server
IP:port/path /filename.xml
Domain firmware=http:// domain ;config=http:// domain /filename.xml
Domain/path firmware=http:// domain/path ;config=http:// domain/path
/filename.xml
Domain:port
firmware=http:// domain:port ;config=http:// domain:port /filename.
xml
Domain:port/path firmware=http:// domain:port/path ;config=http:// domain:port/pat
h /filename.xml
In Parameters in the configuration file template , firmware indicates the version file URL,
and config indicates the configuration file URL.
7. Power on all IP phones.
After being powered on, a phone obtains the IP address from the DHCP server. Then the
DHCP server delivers the version file URL and configuration file URL to the phone