Huawei eSpace 6805 Administrator'S Manual Download

Page: 38 / 161

eSpace 6805 IP Phone
Administrator Guide

3 Configuration and Loading Files

Issue 01 (2014-01-06)

Huawei Proprietary and Confidential

Upgrade and Provisioning

Figure 3-24

Upgrade and Provisioning

Table 3-22

Upgrade and Provisioning

Parameter

Description

Firmware Upgrade and Provisioning

Specifies how firmware upgrading and
provisioning request to be sent.

XML Config File Password

The password for encrypting the XML
configuration file using OpenSSL. This is
required for the phone to decrypt the
encrypted XML configuration file.

HTTP/HTTPS User Name

The user name for the HTTP/HTTPS server.

HTTP/HTTPS Password

The password for the HTTP/HTTPS server.

Upgrade via

Allows users to choose the firmware
upgrade method via HTTP or HTTPS.

Firmware Server Path

Defines the server path for the firmware
server.

Config Server Path

Defines the server path for provisioning.

Firmware File Prefix

If configured, only the firmware with the
matching encrypted prefix will be
downloaded and flashed into the phone.

Firmware File Postfix

If configured, only the firmware with the
matching encrypted postfix will be

Summary of Contents for eSpace 6805


































































































































































Search results

Summary of Contents for eSpace 6805

Reviews:

Related manuals for eSpace 6805

Brands by name

Popular brands

Huawei eSpace 6805, Administrator'S Manual

Search results

Summary of Contents for eSpace 6805

Reviews:

Related manuals for eSpace 6805

Brands by name

Popular brands