Huawei eSpace 6805, Administrator'S Manual

Page: 91 / 161

eSpace 6805 IP Phone
Administrator Guide
6 Appendix
Issue 01 (2014-01-06) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
89
The path is Software Downloads > Unified Communication > IP Phone > Version (For
example, IP Phone V100R001C02) > software .
Double-click the config.xml file, and modify parameter settings.
Each configuration file parameter is in .xml format and consists of multiple items. Each item
consists of the parameter name, value, and description.
Figure 6-13 shows the configuration file template.
Figure 6-13 Configuration file template
Table 6-2 lists the commonly used parameters and their settings.

For parameter description, see Table 1 in the Advanced Configuration and Table 1 in the Individual
Account Configuration.
 When modifying the template, you are advised to comment out unnecessary parameters. If you want
to use these parameters again, delete the comment characters.
Table 6-2 Parameters in the configuration file template
ID Paramete
r Setting
Example Description
P8
IP
Address
0 Mode of obtaining the phone's IP address.

0: Obtain the IP address through DHCP
 1: Use a static IP address.
 2: Obtain the IP address through PPPoE
The default value is 0 .
P64 Time
Zone TZY-8 Time zone of a phone.
If the phone is not located in a defined time zone,
set this parameter to
customize , and set the P246
parameter at the same time.
The default value is TZY-8 .
P246 Self-Defin MTZ+6MDT+5 User-defined time zone including the DST. For