Huawei EchoLife HG8240, Service Manual

Page: 345 / 358

Parameter Description
Fax Transmode Indicates the fax mode, including pass-through and T.38.
l Pass-through: The MG encodes the fax signals
transmitted by a fax machine according to the voice codec
(G.711), and then coverts such signals into the RTP data
packets for real-time transmission over an IP network.
l
T.38: The MG, through ITU-T T.38, converts the T.30-
compliant fax signals transmitted by a fax machine into
the T.38 packets for transmission over an IP bearer
network.
Fax Switchmode Indicates the fax switching mode, including negotiation and
self-switch. The fax switching mode is selected according to
the customer requirements.
Profile Index Indicates the control point parameters. Such parameters are
selected according to the softswitch. Generally, the default
settings are adopted.
Software Parameters Indicates the software parameters. Such parameters are
selected according to the softswitch. Generally, the default
settings are adopted.
Start Negotiate Version Indicates the start version of the H.248 protocol for
negotiation. It is selected according to the softswitch. The
value range is 0 to 3, and the default value is 2.
l
0: Indicates that the negotiation is based on the profile
parameters.
l 1-3: Indicates the start version of the H.248 protocol for
negotiation.
Enable Echo
Cancellation Enables or disables echo cancellation. By default, echo
cancellation is enabled.
5.9.2 VoIP User Configuration
l
VoIP User Configuration - SIP protocol
1. In the navigation tree on the left, choose Voice > VoIP User Configuration . In the
pane on the right, you can configure parameters of a VoIP user, including the register
user name, authentication user name, password, and associated POTS, as shown in
Figure 5-32 .
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
5 Web Page Reference
Issue 04 (2011-01-12) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5-37