Huawei B2368 User Manual Download Page 14

Page: 14 / 176

LTE CPE B2368 User's
Guide

Content

Issue 01

Figure 1-6

The rear panel of the indoor unit

Figure 1-6

The rear panel of the indoor unit

NOTE

If there is no LTE modem plugged into the mains, will not light any LED.

Table 1-2

Description LED indicators of the indoor unit (left to right)

Table 1-2

Description LED indicators of the indoor unit (left to right)

ICE

COLOR STATUS

Description

PWR / S
YS

green

Shines

LTE modem is connected to the network and ready for use.

Flashing

Ongoing marketing LTE modem into operation.

red

Shines

During the self-test fault has been detected / not inserted SIM
card.

Flashing

Firmware update is LTE modem.

Off

LTE modem is not connected to the mains.

PHONE Green

Shines

The telephone jack is assigned SIP account.

Flashing

Phone connected to the socket has posted handset / device
registered incoming call.

Yellow

Shines

The telephone jack is assigned SIP account, which was delivered to the
voice message.

Flashing

The phone jack is connected to the phone and posted to the
account SIP voice message was delivered.

Summary of Contents for B2368

















































































































































































Search results

Summary of Contents for B2368

Reviews:

Related manuals for B2368

Brands by name

Popular brands

Huawei B2368, User Manual

Search results

Summary of Contents for B2368

Reviews:

Related manuals for B2368

Brands by name

Popular brands