3-42
• battery case cover
2. Check:
• fuses
a. Connect the pocket tester to the fuse and check it for
continuity.
。
Note
:
Set the tester to the “
Ω
× 1” position.
b. If the tester indicates“
∞
”, replace the fuse.
3. Replace:
• blown fuse
a. Turn off the ignition.
b. Install a new fuse of the proper amperage.
c. Turn on switches to verify operation of the related
electrical devices.
d. If the fuse immediately blows again, check the
electrical circuit.
Description
Current
rating
Quantity
Main
30 A
1
Lighting
system fuse
15 A
1
Ignition
10 A
1
Terminal
(Auxiliary
DC jack)
10 A
1
4WD(Four wheel
drive)
3 A
1
Signaling
system fuse
10 A
1
Carburetor
heater fuse
10 A
1
Backup fuse
10 A
1
Reserve
30 A
1
Reserve
15 A
1
Reserve
10 A
1
Reserve
3 A
1
WARNING
:
Never use a fuse with a rating other than that
specified. Never use other materials in place of a
fuse. An improper fuse may
cause extensive
Summary of Contents for UTV 700 2009
