3-2
Rear brake*
·
Check operation.
·
Adjust if necessary.
○
○
○
○
○
Select lever safety
system cable
·
Check operation.
·
Adjust if necessary.
○
○
○
V-belt*
·
Check operation.
·
Check for cracks or damage.
○
○
○
○
Wheel
·
Check balance/damage/
·
Repair if necessary.
○
○
○
○
Wheel bearing*
·
Check bearing assemblies for looseness
/damage.
·
Replace if necessary.
○
○
○
○
Front and rear
suspension*
·
Check operation.
·
Correct if necessary.
○
○
Steering system*
·
Check operation./Replace if damaged
·
check toe-in./Adjust if necessary.
○
○
○
○
○
Drive shaft universal
joint*
·
Lubricate with
lithium–soap–based
grease.
○
○
○
Axle boots*
·
Check operation.
·
Replace if damaged.
○
○
○
○
○
Fittings and
fasteners*
·
Check all chassis fittings and
fasteners.
·
Correct if necessary.
○
○
○
○
○
Lights and switches*
·
Check operation.
·
Adjust headlight beams.
○
○
○
○
○
Note
:
·
Recommended brake fluid: DOT 4
·
Brake fluid replacement:
·
When disassembling the master cylinder or caliper, replace the brake fluid. Normally check the
brake fluid level and add fluid as required.
·
On the inner parts of the master cylinder and caliper, replace the oil seals every two years.
·
Replace the brake hoses every four years, or if cracked or damaged.
Summary of Contents for UTV 700 2009
