5-84
COOLING SYSTEM
Cooling System
OIL COOLER
CHECKING THE OIL COOLER
1. Check:
• oil cooler
if the oil cooler is distortion and leak oil.To adjust
the distortion one,and welding the leak one.If it can
not solve,instead the oil cooler
2. Check:
• all metal hose
• all rubber hose
Cracks/damage Replace.
3.To take a pressure resistance inspection to the
Oil Cooling System after maintain, the pressure is
0.3MPA.
4. After take the pressure resistance inspection,
pass over 0.03MPA compressed air through the
connecting oil cooler, steel oil pipe and Rubber
Pipe for 3 minutes, do not leak.
5. When it is finished assembly, pour the" L" engine
oil, then start the engine for 10 minutes to check
whether leaks. If it is not ,the Oil Cooling System
maintain is finish.
Summary of Contents for UTV 700 2009
