HTP Pro Pulse 300, Owner'S Manual

Page: 20 / 37

20
MIG 2T
Fig. 20
Press and release Select Mode button A ( Fig. 4 ) as
many times as needed until the green LED next to MIG
2T illuminates. If welding in the manual mode is
desired, quickly press and release button B ( Fig. 4 )
twice. The machine is now in manual mode ( Fig. 20 ).
Turn left encoder F to set the wire feed speed and turn
right encoder G ( Fig. 4 ) to set the voltage.
If welding with synergic or pulse programs is desired,
press and release button B once to display the program
list. ( Figs. 21 & 22 ).
Fig. 21
Fig. 22
Use right encoder G ( Fig. 4 ) to scroll through the
program list and select the program that best fits your
current job (the yellow bar that highlights the program
will move as you turn right encoder G ).
There are 32 programs in the Pro Pulse 300. To see a
complete list of the programs installed on your Pro Pulse
300, please see Appendix I on Page 33 . Each program
listed includes a short description. The list below shows
examples of what you will see in the program list:

Ms—ER70S3 or ER70S6 Mild Steel

Al 5356—5356 Alloy Aluminum

Al 5554—5554 Alloy Aluminum

Al 4043—4043 Alloy Aluminum
 SS308—308 Alloy Stainless Steel

SiBro—Silicon Bronze (brazing wire)
 Flux-Cored Gasless—E71T-11 or E71TGS

Flux-Cored—E71T1

.025, .030, .035, 3/64—These numbers refer to the
wire diameter required for the selected program.

Ar 8-25%CO2—Indicates the welding gas required.
This program requires a mixed gas with the majority
being Argon and the balance being CO2. Mixtures
from 92% Argon and 8% CO2 to 75% Argon and
25% CO2 are acceptable.

Ar 8-10%CO2—Indicates that either a 92% Argon
and 8% CO2 or a 90% Argon and 10% CO2 gas
mixture is required.

Ar 2%CO2—Indicates that a 98% Argon and 2%
CO2 gas mixture is required.

Ar 25%CO2—Indicates that a 75% Argon and 25%
CO2 gas mixture is required.

100%Ar—Indicates that 100% Argon is required.
How Pulse Works
(All alloys and all programs)
All of the programs labeled either PULSE , PAW , or
iCold are pulse programs in one for m or another.
PULSE is a regular syner gic program with syner gic
pulse. PAW is a synergic program with synergic pulse
that is especially designed to weld very thin material.
iCold is a syner gic program with syner gic pulse
especially designed for production welding (higher
travel speeds, less heat input, and less distortion). Each
of these programs feature the option of standard synergic
single pulse, a factory preprogrammed double pulse, and