Htek UCV Series, User Manual

Page: 26 / 111

Call Features
26
Making multiple calls
When you are in a call, you can hold your current call and place a new call.
1. Tap to place the current call on hold.
2. Tap .
3. Input another number,
4. Tap to send the call
Place a Video Call
First, please confirm that the phone camera is turned on(UCV22), or the camera has
been successfully connected(UCV20). This function requires PBX support. Please
contact your administrator for confirmation.
1. Place a call as described above
2. Tap to change to a video call
End a Call
Here shows to end a call during three modes:
To end a call by Handset
In handset mode, tap
To end a call under Headset Mode
In headset mode, tap
To end a call under Speakerphone Mode
In speakerphone mode, tap .
Note:
During the conference, to end the call is same as mentioned above.
Redial a Call
To redial the last placed call from the IP Phone:
UCV20: Tap directly when LCD is on the idle interface or Tap in the DSS Keys.
UCV22: Tap in the DSS Keys