![background image](http://html1.mh-extra.com/html/ht/quicklan6050n/quicklan6050n_user-manual_2178124016.webp)
QUICKLAN 6050N
EN - 15
3. The numeric marker
“
0
”
(default) flashes on the display. Press the arrow key
or
to select the value among the options
0 ÷ 9
. This numeric marker is associated to
the one considered when setting the type of cable (see § 5.1.3).
4. Press the
SET/UNIT
key to set the length of the reference cable between:
10 ÷ 250
(unit
m
) or
30 ÷ 750
(unit
ft
). The value flashes on the display. Use the arrow keys
or
in order to respectively decrease or increase the value (press and hold the keys
for a quick selection).
5. Press the
SET/UNIT
key to select the activation/deactivation of cable calibration. Use
the arrow keys
or
to select the options:
yes
(SI) or
no
(NO)
6. Press the
TEST/
key to save all settings and go back to main screen.
7. Perform measurement as indicated in § 5.5. Values will be considered by the
instrument as a reference for that specific length measurement.
CAUTION
In case it is not necessary to calibrate the length of the cable, always select
option
“
no
”
in order to prevent possible incorrect measurements.