HT QUICKLAN6050N, User Manual

Page: 3 / 19

QUICKLAN 6050N
EN - 2
1. PRECAUTIONS AND SAFETY MEASURES
The instrument has been designed in compliance with the safety directives relevant to
electronic measuring instruments. For your safety and in order to prevent damaging the
instrument, please carefully follow the procedures described in this manual and read all
notes preceded by symbol
with the utmost attention. Before and after carrying out
measurements, carefully observe the following instructions:

Do not carry out any measurement in humid environments.

Do not carry out any measurements in case gas, explosive materials or flammables are
present, or in dusty environments.

Avoid any contact with the circuit being measured if no measurements are being
carried out.

Avoid any contact with exposed metal parts, with unused measuring probes, circuits,
etc.

Do not carry out any measurement in case you find anomalies in the instrument such
as deformation, breaks, substance leaks, absence of display on the screen, etc.
1.1. PRELIMINARY INSTRUCTIONS

Before using the instrument, please carefully read this user manual.

Each instruction preceded by symbol must be carefully complied with in order to
prevent accidents or damage.

Make sure the batteries are installed correctly.

This instrument must be used only by skilled personnel capable of taking the
appropriate safety precautions.

Do not carry out any measurement under conditions outside the ranges specified in this
manual.
CAUTION
Only connect the instrument to disconnected (non-live) cables. Connection to
active telephone lines and/or data nets may damage the instrument.
1.2. DURING USE
Carefully read the following recommendations and precautions for use:
CAUTION
Should the instrument display symbol
“ ”
it is necessary to stop measuring
and replace the batteries. Never replace batteries while the instrument is
installed on the conductor.

Do not use the instrument, if damaged.

Do not use the instrument outdoors.

Do not perform any test under environmental conditions exceeding the limits indicated
in § 7.3.1.

Do not expose the instrument to water.
1.3. AFTER USE

Always switch off the instrument after use.

In case the instrument is not to be used for a long time, remove the batteries.