QUICKLAN 6050N
EN - 5
4.3.
DESCRIPTION OF FUNCTION KEYS
4.3.1. ON/OFF
key
Press the
key to switch on or off the instrument. The LCD display shows all of its
segments for a moment. The
key is also used to set the instrument
’
s parameters (see §
5.1).
4.3.2. Arrow
keys
The arrow keys
,
are used to set the instrument
’
s parameters (see § 5.1) and to
select the cable pairs for measuring length (see § 5.5).
4.3.3. L/W
key
Use the
L/W
key to:
Go to the Mapping test screen (WIREMAP) and to the Length measuring screen
(LENGTH).
Set the length measuring unit (see § 5.1.4).
Define calibration operations of cable length (see § 5.5.1).
4.3.4. SET/UNIT
key
Press the
SET/UNIT
key to select the current remote unit in case the test is performed with
more remote units present (see § 5.2.3). Press and hold the
SET/UNIT
key for 3s in order
to enter/exit the section for setting the internal parameters of the instrument and navigate
inside it (see § 5.1).
4.3.5. TEST/
Press the
TEST/
key to activate a measuring test and to confirm the values of
parameters when programming the instrument (see § 5.1).