![background image](http://html1.mh-extra.com/html/ht/quicklan6050n/quicklan6050n_user-manual_2178124013.webp)
QUICKLAN 6050N
EN - 12
5.3.
TEST OF CABLE MAPPING WITH RJ11 CONNECTOR
1. Switch on the instrument by pressing the key.
2. Select the type of cable
AJII (RJ11)
to be tested (see § 5.1.3).
3. Connect the ends of the cable to be tested to the instrument
’
s input RJ11 connector
(see Fig. 1
–
part 8) and to the remote unit #1 (see Fig. 10). if necessary, use the patch
cables provided as shown in Fig. 7.
Fig. 10: Connection of the instrument to cable with RJ11 connector
4. Press the
TEST/
key. The instrument carries out the test and displays the message
“
PASS
”
for a correct test (see Fig. 11) or symbol
“
”
together with flashing pairs in
case of wiring error (see § 5.2.1).
Fig. 11: Display of correct test on cable with RJ11 connector
5. Press the
L/W
key to display cable length (see § 5.5).
CAUTION
Connection of the remote unit is necessary in order to correctly
perform the test.
Only connect the instrument to disconnected (non-live) cables.
Connection to active telephone lines or data nets may damage the
instrument.