![background image](http://html1.mh-extra.com/html/ht/quicklan6050n/quicklan6050n_user-manual_2178124014.webp)
QUICKLAN 6050N
EN - 13
5.4.
TEST OF COAX CABLE MAPPING WITH F CONNECTOR
1. Switch on the instrument by pressing the key.
2. Select the type of cable
COA (COAX)
to be tested (see § 5.1.3).
3. Connect the ends of the cable to be tested to the instrument
’
s input COAX connector
(see Fig. 1
–
part 9) and to the remote unit #1 (see Fig. 12)
Fig. 12: Connection of the instrument to COAX cable with F connector
4. Press the
TEST/
key. The instrument carries out the test and displays the message
“
PASS
”
for a correct test (see Fig. 13
–
left side) or symbol
“
”
together with flashing
pairs in case of interrupted cable (see § Fig. 13
–
right side).
Fig. 13: Displaying the test on COAX cable with F connector
5. Press the
L/W
key to display cable length (see § 5.5).
CAUTION
Connection of the remote unit is necessary in order to correctly
perform the test.
Only connect the instrument to disconnected (non-live) cables.
Connection to active telephone lines or data nets may damage the
instrument.