- 13 -
d)
Keep unused power tools out of the reach of children. Do not let anyone use the
power tool who is not familiar with it or has not read this manual.
Power tools are
dangerous when used by inexperienced people.
e)
Maintain power tools and the application tool with care. Check whether moving
parts function properly and do not jam, whether parts are broken or damaged in
such a way that the function of the power tool is affected. Have damaged parts
repaired before using the power tool.
Many accidents are caused by poorly serviced
power tools.
f)
Keep the tool sharp and clean.
Carefully maintained tools jam less often and are
easier to manage.
g)
Use power tools, application tools, etc. in accordance with these instructions. While
doing so observe the work conditions and the activities to be performed.
The use of
power tools for anything other than the intended application can lead to dangerous
situations.
h)
Use the correct power tool.
Do not use under-performing tools for heavy loads. Do
not use tools for purposes and work for which they are not intended.
i)
Check your device for damage.
Before continued use of the tool safety equipment
must be tested for proper and intended function. Check whether the function of mov
-
ing parts is okay, whether they do not jam, whether any parts are broken, whether all
other parts function properly and whether all conditions which must be met for the
proper operation of the device have been met. Damaged protective devices and parts
should be properly repaired, or replaced by trained customer service unless otherwise
specified in this operation manual. Damaged switches must be replaced by a customer
service workshop. Do not use any tools which cannot be properly switched on and off
using the start button.
2.2
Use and handling of battery tools
a)
Charge the battery only with charging devices which are recommended by the
manufacturer.
There is a risk of fire if the battery is used on an unsuitable charger and
the battery can be permanently damaged.
b)
Use only the specifically designated battery for the power tool.
The use of other
batteries can lead to injuries and the risk of fire.