HS-Technik RoboRiv Operating Instructions Manual Download Page 18 | Manualshive

Page: 18 / 64

HS-Technik RoboRiv Operating Instructions Manual Download Page 18

- 18 -

4 Start-up and use

DANGER

Risk of injury from damaged tools

Damaged tools can lead to injuries or damages.

• All damaged parts must be repaired before use.

Risk of burns due to hot exhaust air

Hot air can escape through exhaust openings.

• Do not place any sensitive body parts directly in front of exhaust openings.

Risk of injury due to improper use

Improper use can lead to injuries or damage.

• Use the tool only for the intended purposes.

Risk of injury from substances

Substances such as lubricating oil and grease are flammable on the skin.

• Avoid contact with such substances.

• Should you still come into contact wash the affected area carefully.

NOTE

Maintain your tool with care. Follow the operation manual during maintenance

and cleaning. Keep the handle free of lubricants and dirt.

NOTE

Do not drop the riveting device, and do not let any other objects fall onto the

riveting device. Protect it from impacts.

NOTE

Ensure that the tool does not come into contact with splashing water or oil.

«
...
16
17
18
19
20
...
»

Summary of Contents for RoboRiv

































































Reviews:

No comments