- 23 -
4.4
Operation
4.4.1 Inserting and removing the battery
• In order to insert the battery (1), align it so that it can be easily pushed onto the moun
-
ting provided along the guide. After sliding it on completely, the fastening clip (2) must
lock the battery firmly and properly into place in the tool housing.
• In order to remove the battery push the latch on the front side of the battery down and
pull the battery forward and off.
• Under no circumstances should you use force to install the battery. If the battery can
not be easily pushed in it was not correctly positioned.
NOTE
Always push the battery all the way in until it locks into place with a click.
WARNING
Risk of injury from falling battery
If the battery is not correctly locked it can fall out and cause injuries.
• Always ensure that the battery is fully locked into place.
1 - Battery
2 - Latch
1
2
