manualshive.com logo in svg

HS-Technik RoboRiv, Operating Instructions Manual, Page: 4 / 64

Share
Download
HS-Technik RoboRiv Operating Instructions Manual Download Page 4

- 4 -

1  Operating principles

Dear customers,

Thank you for choosing a HS-Technik GmbH product. 

This quality product „Made in Germany“ fulfils the highest requirements with regard 

to performance, quality and accuracy. When used correctly the product will definitely 

perform very well for many years. 

These operating principles contain information on safety and for the operation of the 

tool. In addition it contains information on the dimensions and technical data. We would 

be happy to assist you with additional information or to answer your questions. Our 

technical support and our technicians would be happy to assist you.

1.1 

Scope of delivery

• Cordless blind riveting tool

• Power supply unit for power supply

• USB Cable (Type A on Mini B)

• Operating instructions

1.2 

General information

Read the operating manual before initial operation. 

Please pay particular attention to 

Chapter 2 „General safety information“.

This manual should make it easier for the operator to get to know the tool and to make 

use of its intended application possibilities. The operating instructions include important 

information related to the safe and proper operation of the tool. Compliance with these 

instructions helps you to:

• Avoid dangers

• Avoid repair costs and downtimes

• Increase the reliability and the lifespan of the product.

Summary of Contents for RoboRiv

































































Reviews:

No comments