Photo 35
Photo 36
With the horizontal braces removed, you are now able to remove the eight
fasteners securing the isolation base mounts to the vertical leg assemblies (see
Photo 37). Have someone support the mounts as you do this so they do not fall
onto lower parts of the frame system.
Photo 37
Once all the fasteners have been removed, you can move and reattach the
isolation base mount at your desired location. Torque all eight 1/4”-20x3/4”
screws on each isolation base mount with the 5/32” T-wrench until you can turn
the handle of the T-wrench 1/8 of a rotation without turning the screw.