HPE Synergy 12000 Frame, Maintenance And Service Manual

Page: 116 / 141

3 SFP+ Image Streamer port
LEDs Left LED Left LED
Link/Activity mode:
Off = No Link
Solid green = Ethernet linked at 10Gb
PID:
Off = Not configured
Solid blue = Port ID
Solid green = Configured for Ethernet
Solid red = Error
Ethernet:
Off = Not Ethernet
Solid green = Configured for Ethernet
Fibre Channel:
Always off
Right LED Right LED
Link/Activity mode:
Off = No activity
Flashing green = Activity at 10Gb
PID:
Always off
Ethernet:
Always off
Fibre Channel:
Always off
4 Fibre Channel (FC) mode
LED Solid green = FC mode is selected.
5 Ethernet mode LED Solid green = Ethernet mode is selected.
6 PID mode LED Solid green = PID mode is selected.
7 Link/Activity mode LED Solid green = Link/Activity mode is selected.
8 Health LED Solid green = Normal
Flashing amber = There is a fault condition
Flashing red = Critical fault detected
Solid red = No power present
9 Mode button Press and hold the Mode button for more than 5 seconds to reset.
Solid green = There are four LEDs that indicate the operating mode for the
Port LEDs. The operating mode is selected by pressing the Mode button on
the front panel. The LED mode state determines which of the four Mode
LEDs is lit.
10 UID LED Solid blue = Activated
Flashing blue = Firmware upgrade in progress
Off = Deactivated
Item Item Description Description Status Status
2
1
HPE Virtual Connect SE 100Gb F32 Module for HPE Synergy LEDs and buttons 116