HPE ProLiant DL385 Gen10, Maintenance And Service Manual

Page: 95 / 166

2.
Use a T-20 Torx screwdriver to loosen the three captive screws in the sequence shown in the following image, and
then pivot the force frame upward.
3.
Remove the external cap:
a. Hold the lift tabs near the front end of the rail frame, and then pivot the rail frame to the vertical position.
b. Slide the external cap out of the rail frame.
Retain the external cap for future use.
4.
Install the processor:
a. Hold the processor by its carrier handle and slide the processor into the rail frame until it engages with a click
sound.
b. Remove the pin field cover cap.
Removal and replacement procedures
95